·Some details are not shown. Please refer to specification sheets for all information.

A-33

Lightning Surge Protectors for
Electronics Equipment M-RESTER

DIN RAIL MOUNTING ADAPTER

Functions & Features
• Used for mounting MDP type lightning surge protectors on a DIN rail

MODEL: A-33

ORDERING INFORMATION
• Code number: A-33

GENERAL SPECIFICATIONS
Mounting: M4 × 8 screws with washer (two; attached)
Material: Flame-resistant resin (black)

INSTALLATION
Operating temperature: -20 to +80°C (-4 to +176°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Weight: 25 g (0.88 oz)

GROUNDING
A crossover wire between M-RESTER ground (G) and ground (G) of the protected equipment is required for protetion as indicated in the figure below.

EXTERNAL DIMENSIONS unit: mm (inch)

MOUNTING REQUIREMENTS unit: mm (inch)

MG Co., Ltd.