ES-3435 Rev.10
BS-16
INSTALLATION BASE (16 positions)
Functions & Features
• Saving individual wiring work for panel installation of the H-UNIT modules
• High-density mounting
• 16 outputs available at the connector
• Printing wiring for line voltage distribution
• Monitoring at screw terminals
MODEL: BS-16[1][2]
ORDERING INFORMATION
• Code number: BS-16[1][2]
Specify a code from below for each of [1] and [2].
(e.g. BS-16H1/Q)
• Specify the specification for option code /Q
(e.g. /C01)
CAPACITY
16
: 16 units
[1] FUNCTION
H1
: Input & output connector plus power distribution
H2
: Loop powered isolator use (output connector)
H3
: Power distribution
[2] OPTIONS
blank
: none
/Q
: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to our web site.)
Only solder side of the main PWB is coated.
/C01
: Silicone coating
/C02
: Polyurethane coating
/C03
: Rubber coating
RELATED PRODUCTS
• Resistor module (model: REM-x)
• Special cable with 40-pin connector (model: FCN)
GENERAL SPECIFICATIONS
Capacity
: 16 positions
Connection
: M3.5 screw terminals (torque 0.8 N·m)
and 40-pin connector(s)
Screw terminal
: Nickel-plated steel
Isolation
BS-16H1: I/O connector to power to ground
BS-16H2: Input to output terminals or connector to ground
BS-16H3: Input to output or connector to power to ground
INPUT & OUTPUT
■
BS-16H1
Input
: DC voltage; resistor module (model: REM-x) attached to the input terminals for current input
Output
: DC voltage or current*
Connection
: Screw terminals and 40-pin connector
Power input
: 16 loops collectively
■
BS-16H
2 (model HSN use
)
Input
: Loop powered isolator (4 – 20 mA DC or 10 – 50 mA DC)
Output
: 1 – 5V DC or 4 – 20 mA DC*
Connection
: Screw terminals and 40-pin connector
Power input
: Not required
■
BS-16H
3
Input
: DC voltage; resistor module (model: REM-x) attached to the input terminals for current input
Output
: DC voltage or current
Connection
: Screw terminals
Power input
: 16 loops collectively
*For current signals, either screw terminal or 40-pin connector is available.
INSTALLATION
Power input
•
DC
: 24 V DC ±10 %
Operating temperature
: -5 to +60°C (23 to 140°F)
Operating humidity
: 30 to 90 %RH (non-condensing)
Mounting
: Surface
Weight
: 1.8 kg (4.0 lb)
PERFORMANCE
Insulation resistance
: ≥ 100 MΩ with 500 V DC
Dielectric strength
BS-16H1
: 500 V AC @ 1 minute
(I/O connector to power)
1500 V AC @ 1 minute (power to ground)
500 V AC @ 1 minute (I/O connector power to ground)
BS-16H2
: 500 V AC @ 1 minute
(Input to output terminals or connector to ground)
BS-16H3
: 500 V AC @ 1 minute
(Input to output to power)
1500 V AC @ 1 minute (power to ground)
500 V AC @ 1 minute (Input or output to ground)
EXTERNAL DIMENSIONS unit: mm [inch]
■BS-16H1
■BS-16H2
■BS-16H3
MOUNTING REQUIREMENTS unit: mm [inch]
I/O CONNECTOR PIN ASSIGNMENT