ES-9043 Rev.1

JC-ECT

Remote I/O JC Series

JUNCTION SLAVE

(EtherCAT)
EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.

MODEL: JCT–ECT–[1]–R[2]

ORDERING INFORMATION

• Code number: JC-ECT-[1]-R[2]
Specify a code from below for each of [1] and [2].
(e.g. JC-ECT-4-R/Q)
• Specify the specification for option code /Q
(e.g. /C01)

[1] MODULE TYPE

4: 4 ports
8: 8 ports

POWER INPUT

DC power
R: 24 V DC
(Operational voltage range: ±10 %; ripple 10 %p-p max.)

[2] OPTIONS

blank: none
/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to our web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating

FUNCTIONS & FEATURES

Realizes flexible EtherCAT wiring with combination of daisy-chain connection and branch connection.

RELATED PRODUCTS

• Remote I/O R8 series (model: R8-NECT1)
• Remote I/O R80 series (model: R80NECT1)
• Remote I/O R3 series (model: R3-NECT1)
• Remote I/O R30 series (model: R30NECT1)
• Remote I/O R7I4D series (model: R7I4DECT)
• ESI file
(downloadable at our web site.)

GENERAL SPECIFICATIONS

Number of ports:
JC-ECT-4: 1 input port; 3 output ports
JC-ECT-8: 1 input port; 7 output ports
Max. number of connected nodes:
JC-ECT-4: 1
JC-ECT-8: 3
Connectable devices: Devices conforming to EtherCAT
Connection
EtherCAT: RJ-45 modular jack
Power input: spring clamp terminal
Power indicator: Green LED turns on while the power is supplied.

EtherCAT COMMUNICATION

Standard: IEEE 802.3u
Transmission type: 100BASE-TX
Transmission speed: Full-duplex 100 Mbps
Transmission media: 100BASE-TX (STP cable; Category 5e)
Maximum node length: 100 m
Status indicator: L/A

INSTALLATION

Rated current for power supply connector: 8A
Power consumtpion:
JC-ECT-4: Approx. 2.0 W
JC-ECT-8: Approx. 4.2 W
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 10 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Surface or DIN rail
Weight
JC-ECT-4: 150 g (0.33 lb)
JC-ECT-8: 170 g (0.37 lb)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC
JC-ECT-4 (IN or X2 or X3 or X4 or FE to power)
JC-ECT-8 (IN or X2 or X3 or X4 or X5 or X6 or X7 or X8 or FE to power)
Dielectric strength: 1500 V AC @ 1 minute
JC-ECT-4 (IN or X2 or X3 or X4 or FE to power)
JC-ECT-8 (IN or X2 or X3 or X4 or X5 or X6 or X7 or X8 or FE to power)