ES-5107 Rev.10
M2VF3
Super-mini Signal Conditioners Mini-M Series
SIGNAL TRANSMITTER
(high-accuracy, ultra-high speed response 30 μsec.)
Functions & Features
• Converts DC input from a sensor into a standard process signal
• Frequency characteristics 12 kHz (-3 dB)
• 30-microsecond response
Typical Applications
• Isolation for a vibration analyzing system
• Isolation for Discharge/Charge tester
MODEL: M2VF3–[1]4W–R[2]
ORDERING INFORMATION
• Code number: M2VF3-[1]4W-R[2]
Specify a code from below for each of [1] and [2].
(e.g. M2VF3-04W-R/CE/Q)
• Special input range (For code 0: e.g. -164 – +164 mV DC)
• Specify the specification for option code /Q
(e.g. /C01/S01)
[1] INPUT
Voltage
2W
: -100 – +100 mV DC (Input resistance 1 MΩ min.)
4W
: -10 – +10 V DC (Input resistance 1 MΩ min.)
5W
: -5 – +5 V DC (Input resistance 1 MΩ min.)
8W
: -20 – +20 V DC (Input resistance 1 MΩ min.)
0:
Specify voltage (Select input range as indicated below)
-20 – +20 mV DC
-24 – +24 mV DC
-40 – +40 mV DC
-85 – +85 mV DC
-164 – +164 mV DC
-200 – +200 mV DC
-15 – +15 V DC
-25 – +25 V DC
-55 – +55 V DC
-60 – +60 V DC
-300 – +300 V DC *
-350 – +350 V DC *
-400 – +400 V DC *
-600 – +600 V DC *
-800 – +800 V DC *
* Select ‘/N’ for ‘Standards & Approvals’ code.
Multiple installation bases are unable.
OUTPUT
Voltage
4W
: -10 – +10 V DC (Load resistance 2000 Ω min.)
POWER INPUT
DC Power
R
: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
[2] OPTIONS (multiple selections)
Standards & Approvals (must be specified)
/N
: Without CE or UKCA
/CE
: CE marking
/UK
: CE, UKCA marking
Other Options
blank
: none
/Q
: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to our web site.)
/C01
: Silicone coating
/C02
: Polyurethane coating
/C03
: Rubber coating
/C04
: Polyolefin coating
TERMINAL SCREW MATERIAL
/S01
: Stainless steel
GENERAL SPECIFICATIONS
Construction
: Plug-in
Connection
: M3 screw terminals (torque 0.8 N·m)
Screw terminal
: Chromated steel (standard) or stainless steel
Housing material
: Flame-resistant resin (black)
Isolation
: Input to output to power
Overrange input
: -5 to +105 %
Zero adjustment
: -1 to +1 %; multi-turn screwdriver adjustments (front)
Span adjustment
: 99 to 101 %; multi-turn screwdriver adjustments (front)
Power indicator LED
: Green LED turns on when the power is supplied.
INPUT SPECIFICATIONS
Input resistance:
≥ 1 MΩ (3 kΩ min. in power failure)
OUTPUT SPECIFICATIONS
Parallel load capacitance:
≤ 2000 pF
INSTALLATION
Power consumption
•
DC
: ≤ 0.6 W
Operating temperature
: -5 to +55°C (23 to 131°F)
Operating humidity
: 30 to 90 %RH (non-condensing)
Mounting
: Surface or DIN rail
Weight
: 150 g (0.33 lb)
PERFORMANCE in percentage of span
Accuracy
: ±0.01 %
Temp. coefficient
: ±0.005 %/°C (±0.003 %/°F)
Frequency characteristics
: 12 kHz, -3 dB
Response time
: ≤ 30 µsec. (0 – 90 %)
Line voltage effect
: ±0.01 % over voltage range
Insulation resistance
: ≥ 100 MΩ with 500 V DC
Dielectric strength
: 2000 V AC @1 minute (input to output to power to ground)
STANDARDS & APPROVALS
EU conformity
:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
UK conformity (UKCA):
The UK legislations and designated standards are equivalent to the applicable EU directives.
(Refer to our website for more information about the legislations and designated standards.)
EXTERNAL VIEW
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM