ES-8033 Rev.2
M60EWVS
Base-free Interconnecting Ultra-Slim Signal Conditioners M60E Series
SIGNAL TRANSMITTER
(field-configurable, two isolated outputs)
Functions & Features
• Converts DC input from a sensor into a standard process signal
• Output range and response time selectable with DIP SW
• Power connector for interconnecting modules and collectively supplying power
• e-CON connector connection for easy wiring
• 6-mm wide ultra-slim design
• Low profile allows mounting in a 120-mm deep panel
• High-density mounting
• Power indicator LED
MODEL: M60EWVS-R[1]
ORDERING INFORMATION
• Code number: M60EWVS-R[1]
Specify a code from below for [1].
(e.g. M60EWVS-R/Q)
• Specify the specification for option code /Q
(e.g. /C01)
• Default at shipment
Input range: 4 – 20 mA DC
Output 1 range: 4 – 20 mA DC
Output 2 range: 4 – 20 mA DC
Response time: Standard response
INPUT – Field-selectable
Current
4 – 20 mA DC (Input resistance 50 Ω)
0 – 20 mA DC (Input resistance 50 Ω)
Voltage
0 – 10 V DC (Input resistance 200 kΩ min.)
2 – 10 V DC (Input resistance 200 kΩ min.)
0 – 5 V DC (Input resistance 100 kΩ min.)
1 – 5 V DC (Input resistance 100 kΩ min.)
OUTPUT 1 – Field-selectable
Current
4 – 20 mA DC (Load resistance 300 Ω max.)
0 – 20 mA DC (Load resistance 300 Ω max.)
Voltage
0 – 5 V DC (Load resistance 5000 Ω min.)
1 – 5 V DC (Load resistance 5000 Ω min.)
OUTPUT 2 – Field-selectable
Current
4 – 20 mA DC (Load resistance 300 Ω max.)
0 – 20 mA DC (Load resistance 300 Ω max.)
Voltage
0 – 5 V DC (Load resistance 5000 Ω min.)
1 – 5 V DC (Load resistance 5000 Ω min.)
POWER INPUT
DC Power
R
: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
[1] OPTIONS
blank
: none
/Q
: Options other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to our web site.)
/C01
: Silicone coating
/C02
: Polyurethane coating
GENERAL SPECIFICATIONS
Connection
Input and output
: 4-pin e-CON connector
Power input
: Via the power connector or the 4-pin e-CON connector
PWB connector (mounted)
Reccomended cable connector: XN2A-1470 (omron)
Applicable wire size: 0.08mm
2
(AWG28) to 0.5mm
2
(AWG20)
Outer sheath diameter: max. 1.5 dia
(The cable connector is not included in the package.
Refer to the specifications of the product.)
Housing material
: Flame-resistant resin (black)
Isolation
: Input to output 1 to output 2 to power
Zero adjustment
: -2 to +2 % (front)
Span adjustment
: 98 to 102 % (front)
Adjustable individually for each output 1 and output 2.
Power indicator LED
: Green LED turns on when the power is supplied.
INPUT SPECIFICATIONS
■
DC Current
: Input resistor incorporated
INSTALLATION
Power consumption
: 0.7 W max.
Power input
: 3 A (Total current consumed by the interconnected signal conditioners must be 3 A or less.)
Operating temperature
: -20 to +55°C (-4 to +131°F)
Operating humidity
: 30 to 90 %RH (non-condensing)
Atmosphere
: No corrosive gas or heavy dust
Mounting
: DIN rail
Weight
:
65 g (2.3 oz)
PERFORMANCE in percentage of span
Accuracy
: ±0.1 %
I/O setting accuracy
: ±0.2 %
Temp. coefficient
: ±0.01 %/°C (±0.006 %/°F)
Response time
(0 – 90 %): selectable with DIP SW
Standard: ≤ 500 msec.
Fast: ≤ 5 msec.
Line voltage effect
: ±0.1 % over voltage range
Insulation resistance
: ≥ 100 MΩ with 500 V DC
Dielectric strength
: 1500 V AC @1 minute
(input to output 1 to output 2 to power to ground)
STANDARDS & APPROVALS
EU conformity
:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EXTERNAL VIEW
Refer to the instruction manual for the setting procedure.
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM