ES-7924 Rev.6
M6NVF
Screw Terminal Ultra-Slim Signal Conditioners M6N Series
SIGNAL TRANSMITTER
(high-accuracy, ultra-high speed response 30 μsec.)
Functions & Features
• 7.5-mm wide ultra-slim design
• Low profile allows the M6N module mounted in a 120-mm deep panel
• Galvanically isolates process instrumentation signals
• 30-microsecond response
• Frequency characteristics 12 kHz (-3 dB)
• High-density mounting
• Power indicator LED
Typical Applications
• Isolation for a vibration analyzing system
• Isolation for Discharge/Charge tester
MODEL: M6NVF–[1]4W–R[2]
ORDERING INFORMATION
• Code number: M6NVF-[1]4W-R[2]
Specify a code from below for each of [1] and [2].
(e.g. M6NVF-04W-R/Q)
• Special input range (For code 0: e.g. -164 – +164 mV DC)
• Specify the specification for option code /Q
(e.g. /C01)
[1] INPUT
Voltage
2W
: -100 – +100 mV DC (Input resistance 1 MΩ min.)
4W
: -10 – +10 V DC (Input resistance 1 MΩ min.)
5W
: -5 – +5 V DC (Input resistance 1 MΩ min.)
8W
: -20 – +20 V DC (Input resistance 1 MΩ min.)
0
: Specify voltage
(Select input range as indicated below. Input resistance 1 MΩ min.)
-20 – +20 mV DC
-24 – +24 mV DC
-40 – +40 mV DC
-85 – +85 mV DC
-164 – +164 mV DC
-200 – +200 mV DC
-15 – +15 V DC
-25 – +25 V DC
-55 – +55 V DC
-60 – +60 V DC
OUTPUT
Voltage
4W
: -10 – +10 V DC (Load resistance 2000 Ω min.)
POWER INPUT
DC Power
R
: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
[2] OPTIONS
blank
: none
/Q
: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to our web site.)
/C01
: Silicone coating
/C02
: Polyurethane coating
GENERAL SPECIFICATIONS
Connection
Input and output
: M3 screw terminal (torque 0.5 N·m)
Power input
: Via the Installation Base (model: M6NBS)
or M3 screw terminal (torque 0.5 N·m)
Recommended solderless terminal
: Max. 5.8 mm (0.23”)
wide; Ones with insulation sleeve do not fit.
Applicable wire size: 0.2 – 2.5 mm
2
Housing material
: Flame-resistant resin (black)
Isolation
: Input to output to power
Overrange input
: -5 to +105 %
Zero adjustment
: -1 to +1 % (front)
Span adjustment
: 99 to 101 % (front)
Power indicator LED
: Green LED turns on when the power is supplied.
■Recommended solderless terminal (unit: mm [inch])
INPUT SPECIFICATIONS
Input resistance
: 1 MΩ min. (3 kΩ min. at power loss)
OUTPUT SPECIFICATIONS
Parallel load capacitance
: Max. 2000 pF
INSTALLATION
Power consumption
: Approx. 0.6 W
Operating temperature
: -20 to +55°C (-4 to +131°F)
Operating humidity
: 30 to 90 %RH (non-condensing)
Mounting
: Installation Base (model: M6NBS) or DIN rail
Weight
: 60 g (2.1 oz)
PERFORMANCE in percentage of span
Accuracy
: ±0.01 %
Temp. coefficient
: ±0.005 %/°C (±0.003 %/°F)
Frequency characteristics
: 12 kHz, -3 dB
Response time
: ≤ 30 µsec. (0 – 90 %)
Line voltage effect
: ±0.01 % over voltage range
Insulation resistance
: ≥ 100 MΩ with 500 V DC
Dielectric strength
: 2000 V AC @1 minute (input to output to power to ground)
STANDARDS & APPROVALS
EU conformity
:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EXTERNAL VIEW
(With the cover open)
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM