ES-9196 Rev.8

M6-PSM

POWER SUPPLY MODULE

(for AC power use)
Functions & Features
• Supplying power to M6D, M6N, M6S series signal conditioners through an installation base (model: M6xBS-08A)
• Universal AC power input
• Power indicator LED

MODEL: M6–PSM[1]

ORDERING INFORMATION

• Code number: M6-PSM[1]
Specify a code from below for [1].
  (e.g. M6-PSM/Q)
• Specify the specification for option code /Q
  (e.g. /C01)

POWER INPUT

AC Power
100 – 240 V AC (Operational voltage range 90 – 264 V,
47 – 66 Hz)

[1] OPTIONS

blank: none
/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to our web site.)
/C01: Silicone coating
/C02: Polyurethane coating

RELATED PRODUCTS

• Euro terminal ultra-slim signal conditioners M6D series
• Screw terminal ultra-slim signal conditioners M6N series
• Tension-clamp ultra-slim signal conditioners M6S series

GENERAL SPECIFICATIONS

Connection
Power input: Euro type connector terminal,
Applicable wire size: 0.2 - 2.5 mm2 (AWG24 - 12), Stripped length 7 mm
24 V DC power: Via the Installation Base (model: M6xBS-08A)
Housing material: Flame-resistant resin (black)
Isolation: 24 V DC power to power input
Power indicator LED: Green LED turns on when the power is supplied.

INSTALLATION

Power Consumption
•AC:
Approx. 25 VA at 100 V
Approx. 30 VA at 200 V
Approx. 35 VA at 264 V
Operating temperature: -20 to +55°C (-4 to +131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Installation Base (model: M6xBS-08A)
Weight: 200 g (0.44 lb)

PERFORMANCE

Output: 24 V ±1 V DC, 400 mA (continuance)
Arrange in order that the total current consumed by the signal conditioners is within this capacity.
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute (24 V DC power to power input to ground)

STANDARDS & APPROVALS

EU conformity:
EMC Directive 
  EMI EN 61000-6-4
  EMS EN 61000-6-2
Low Voltage Directive 
  EN 61010-1
  Installation Category II
  Pollution Degree 2
 24 V DC power to power input:
  Reinforced insulation (300 V)
RoHS Directive

CURRENT CONSUMPTION

In order to operate M6x signal conditioners, it is required that the total maximum current of the signal conditioners is not more than the continuous output current (400mA) of M6-PSM.
If the power supply (24V DC) of M6-PSM goes insufficient, take some measures, such as changing the combination of signal conditioners or reducing the number of them mounted.
M6DCTC, M6NCTC, M6SCTC  25 mA
M6DDY, M6NDY, M6SDY  50 mA
M6DPA, M6NPA, M6SPA  25 mA
M6DPP, M6NPP, M6SPP  50 mA
M6DVF, M6NVF, M6SVF  30 mA
M6DVS, M6NVS, M6SVS  25 mA
M6DWVS, M6NWVS, M6SWVS  30 mA
M6DXAP, M6NXAP, M6SXAP  50 mA
M6DXAR, M6NXAR, M6SXAR  25 mA
M6DXAS, M6NXAS, M6SXAS  25 mA
M6DXAT, M6NXAT, M6SXAT  25 mA
M6DXF1, M6NXF1, M6SXF1  25 mA
M6DXF2, M6NXF2, M6SXF2  25 mA
M6DXF3, M6NXF3, M6SXF3  25 mA
M6DXM, M6NXM, M6SXM  25 mA
M6DXR, M6NXR, M6SXR  25 mA
M6DXT, M6NXT, M6SXT  25 mA
M6DXU, M6NXU, M6SXU  25 mA
M6DXV, M6NXV, M6SXV  25 mA
M6DYV, M6NYV, M6SYV  21 mA

EXTERNAL VIEW

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM