ES-7984 Rev.11
M6SPS2
Tension-Clamp Ultra-Slim Signal Conditioners M6S Series
POWER SUPPLY MODULE
(dual redundant)
Functions & Features
• Maintenance-free tension clamp connection
• Supplies power to the M6S modules mounted on the Installation Base
• High-density mounting
• Power indicator LED
MODEL: M6SPS2–R[1]
ORDERING INFORMATION
• Code number: M6SPS2-R[1]
Specify a code from below for [1].
(e.g. M6SPS2-R/Q)
• Specify the specification for option code /Q
(e.g. /C01)
POWER INPUT
DC Power
R
: 24 V DC
(Operational voltage range 22 – 27 V, ripple 10 %p-p max.)
[1] OPTIONS
Other Options
blank
: none
/Q
: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to our web site.)
/C01
: Silicone coating
/C02
: Polyurethane coating
GENERAL SPECIFICATIONS
Connection
: Tension clamp
Applicable wire size
: 0.2 to 2.5 mm
2
, stripped length 8 mm
Housing material
: Flame-resistant resin (black)
Power indicator LED
: Green LED turns on when the power is supplied.
INSTALLATION
Power input
: 2 A (Total current consumed by signal conditioners on the base must be 2 A or less.)
Operating temperature
: -20 to +55°C (-4 to +131°F)
Operating humidity
: 30 to 90 %RH (non-condensing)
Mounting
: Installation Base (model: M6SBS)
Weight
: 60 g (2.1 oz)
PERFORMANCE
Insulation resistance
: ≥ 100 MΩ with 500 V DC
Dielectric strength
: 2000 V AC @1 minute (power to ground)
STANDARDS & APPROVALS
EU conformity
:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EXTERNAL VIEW
(With the cover open)
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM