ES-6134 Rev.5
R5-NF1
Remote I/O R5 Series
T-Link INTERFACE MODULE
(Fuji Electric T-Link use)
MODEL: R5-NF1[1]
ORDERING INFORMATION
• Code number: R5-NF1[1]
Specify a code from below for [1].
(e.g. R5-NF1/Q)
• Specify the specification for option code /Q
(e.g. /C01)
[1] OPTIONS
blank
: none
/Q
: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to our web site.)
/C01
: Silicone coating
/C02
: Polyurethane coating
/C03
: Rubber coating
GENERAL SPECIFICATIONS
Connection
T-Link
: Euro type connector terminal
(Applicable wire size: 0.2 – 2.5 mm
2
(AWG 24 to 12), stripped length 7 mm)
Internal bus
: Via the Installation Base (model: R5-BS)
Internal
Power
: Via the base (model: R5-BS)
Isolation
: T-Link to internal bus or internal power
RUN indicator
: Bi-color (green/red) LED; green in normal communications; red when receiving (Function selected with DIP SW3)
ERR indicator
: Bi-color (green/red) LED; the green ON/blinks in communication errors; red when transmitting (Function selected with DIP SW3)
Data allocation
: Mode 1 or 2 set with the side DIP switch
DIP SW other functions
· I/O points
· Input or output or I/O mixed
Refer to the instruction manual for details.
T-Link SPECIFICATIONS
Station No. setting
:
Rotary switch; 00 – 99
Configuration
: Multi-drop
Communication
: Half-duplex
Baud rate
: 500 kbps
Transmission media/distance
:
KPEV-SB, 0.75 mm
2
× 1 pair, 700 m
T-KPEV-SB, 1.25 mm
2
× 1 pair, 1000 m
INSTALLATION
Operating temperature
: -10 to +55°C (14 to 131°F)
Operating humidity
: 30 to 90 %RH (non-condensing)
Atmosphere
: No corrosive gas or heavy dust
Mounting
: Installation Base (model: R5-BS)
Weight
: 150 g (0.33 lb)
PERFORMANCE
Insulation resistance
: ≥ 100 MΩ with 500 V DC
Dielectric strength
: 500 V AC @ 1 minute (T-Link to internal bus or internal power)
EXTERNAL VIEW
TRANSMISSION DATA DESCRIPTIONS
I/O DATA DESCRIPTIONS
The data allocations for typical I/O modules are shown below.
Refer to the manual for each module for detailed data allocations.
■ANALOG 16 BITS DATA
■ 16-POINT DISCRETE DATA
■ 4-POINT DISCRETE DATA
EXTERNAL DIMENSIONS unit: mm [inch]
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM