ES-8007-A Rev.1

R7F4DD-DA16A-C

Remote I/O R7F4D Series

DeviceNet® I/O MODULE

(NPN discrete input, 16 points, tension clamp terminal block)
Functions & Features
• Converts discrete I/O data to the open network fieldbus (DeviceNet)

DeviceNet is registered trademark of ODVA.

MODEL: R7F4DD-DA16A-C[1]

ORDERING INFORMATION

• Code number: R7F4DD-DA16A-C[1]
Specify a code from below for [1].
(e.g. R7F4DD-DA16A-C/Q)
• Specify the specification for option code /Q
(e.g. /C01)

I/O TYPE

DA16A: NPN discrete input, 16 points

TERMINAL BLOCK

C: Euro type connector terminal for communication
and power supply
Tension clamp terminal block for input

[1] OPTIONS

blank: none
/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to our web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating

RELATED PRODUCTS

• PC configurator software (model: R7CFG)
• EDS file
The EDS file and configurator software are downloadable at our web site.
A dedicated cable is required to connect the module to the PC. Please refer to the internet software download site or the users manual for the PC configurator for applicable cable types.

GENERAL SPECIFICATIONS

Connection
Communication, power supply:
Euro type connector terminal
Input: Tension clamp terminal block
Housing material: Flame-resistant resin (gray)
Isolation: Input or exc. supply to communication/power supply
Discrete input status indicator LED: Green LED turns on with input ON
Configurator connection: 2.5 dia. miniature jack

DeviceNet COMMUNICATION

Communication/power supply cable: Approved for DeviceNet
Baud rate setting: 125 kbps, 250 kbps, 500 kbps, auto-tracking (DIP switch, factory default: auto-tracking)
(Refer to the instruction manual.)
Node address setting: 0 - 63 (rotary switch, factory default: 00)
(Refer to the instruction manual.)
Status indicator LEDs: MS, NS
(Refer to the instruction manual for details.)

INPUT SPECIFICATIONS

Common: Positive common (NPN) per 16 points
Number of inputs: 16
Maximum inputs applicable at once: No limit (at 24 V DC)
Sensor excitation: 24 V DC ±10 %; ripple 5 %p-p max.,
≤ 2 A (including discrete input load charge); rated current
8 A
ON voltage / current: ≥ 17 V DC (X0 through XF to +24V) / ≥ 2.3 mA
OFF voltage / current: ≤ 5 V DC (X0 through XF to +24V) / ≤ 0.75 mA
Input current: ≤ 3.5 mA per point at 24 V DC
Input resistance: Approx. 7.2 kΩ
ON delay: ≤ 0.5 msec.
OFF delay: ≤ 0.5 msec.

INSTALLATION

Supply voltage: 11 – 25 V DC (supplied from communication/power supply terminal block)
Current consumption:
Approx. 50 mA @ 24 V DC
Approx. 60 mA @ 11 V DC
Operating temperature: -10 to +55°C (14 to 131°F)
Storage temperature: -20 to +65°C (-4 to +149°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Surface or DIN rail (35 mm rail)
Weight: 150 g (0.33 lb)