ES-7026 Rev.1

R80NCIT1

Remote I/O R80 Series

POWER/NETWORK MODULE

(CC-Link IE TSN)
Functions & Features
• Interchanges analog or discrete I/O signals with the filedbus (CC-Link IE TSN)
• Space-saving

MODEL: R80NCIT1–R[1]

ORDERING INFORMATION

• Code number: R80NCIT1-R[1]
Specify a code from below for [1].
  (e.g. R80NCIT1-R/Q)
• Specify the specification for option code /Q
  (e.g. /C01)

POWER INPUT

DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[1] OPTIONS

blank: none
/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to our web site.)
/C01: Silicone coating
/C02: Polyurethane coating

RELATED PRODUCTS

• PC configurator software (model: R80CFG)
• CSP+ file
The configurator software and CSP+ file are downloadable at our web site.
CSP+ file is also downloadable at CC-Link Partner Association's web site.
For connecting to PC, use commercially available Mini-B type USB cable. (provided by user)

PACKAGE INCLUDES...

• Protective cover

GENERAL SPECIFICATIONS

Connection
• Power input and excitation supply: Tension clamp terminal block (Front Twin connection)
• CC-Link IE TSN: RJ-45 connector
• Internal bus, internal power and excitation supply: Via bus connector
Max. number of I/O modules: 16
(Max. consumption current of I/O modules: 1.6 A)
Isolation: Internal bus or internal power or power input to excitation supply to CC-Link IE TSN or FE1
Internal bus communication cycle: Approx. 65μs+65μs×number of the modules.
Status indicator: PWR, RUN, RD, SD, D LINK, ERR, L ER, LINK
(Refer to the instruction manual.)

CC-Link IE TSN

Protocol: IEEE 802.3
Transmission type: 1000BASE-T
Communication speed: 1 Gbps
Communication method: Time sharing method
Synchronization function: IEEE802.1AS and IEEE1588v2 compliant
Certification class: Class B
Network cable: Cable conformed to CC-Link IE Field
Double shielded twist pair cable (CAT5e)
RJ-45 connector
Network topology: Line, star and ring
Max. number stations: 64770 (Total master and slave station)
(Number of max. connectable slaves may vary depending on the master module. Refer to the instruction manual of the master module)
Max. station-to-station distance: 100 m
Station type: Remote station
Link device: RX/RY 112 points, RWw/RWr 64 points

INSTALLATION

Power consumption
•DC: Approx. 12 W 24 V DC (@ internal power max. current 1.6 A)
Internal power supply (power supply for I/O module):
• DC power supply: 5 V DC
• Current capacity: 1.6 A
Excitation supply output (excitation for I/O module)
• DC: 24 V DC ±10 %
• Operational current: 10 A
 (From power and excitation supply connector, via connector for internal bus, supplied to each I/O module. Power output current consumption must be under operational current.)
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Storage humidity: -20 to +65 % RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: DIN rail
Weight: 230 g (0.51 lb)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute
(internal bus or internal power or power input to excitation supply to CC-Link IE TSN or FE1)

STANDARDS & APPROVALS

Refer to the manuals to comply with the standards.
EU conformity:
EMC Directive  
  EMI EN 61000-6-4
  EMS EN 61000-6-2
RoHS Directive

EXTERNAL VIEW

WIRING

• POWER SUPPLY AND EXCITATION SUPPLY CONNECTOR TERMINAL ASSIGNMENT
Unit side connector: MSTBV2,5/5-GF-5, 08AU (Phoenix Contact)
Cable side connector: TFKC2,5/5-STF-5, 08AU (Phoenix Contact)
Applicable wire size: 0.2 − 2.5 mm2; stripped length 10 mm
Recommended solderless terminal
 • AI0,25−10YE 0.25 mm2 (Phoenix Contact)
 • AI0,34−10TQ 0.34 mm2 (Phoenix Contact)
 • AI0,5−10WH 0.5 mm2 (Phoenix Contact)
 • AI0,75−10GY 0.75 mm2 (Phoenix Contact)
 • AI1−10RD 1.0 mm2 (Phoenix Contact)
 • AI1,5−10BK 1.5 mm2 (Phoenix Contact)
 • AI2,5−10BU 2.5 mm2 (Phoenix Contact)

EXTERNAL DIMENSIONS unit: mm [inch]

■UNIT
■PROTECTIVE COVER

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Note: In order to improve EMC performance, bond the FE1 terminal to ground.
Caution: FE1 terminal is NOT a protective conductor terminal.