ES-7027 Rev.1
R80PS1
Remote I/O R80 Series
EXTENSION POWER SUPPLY MODULE
(non-isolated)
Functions & Features
• Inserted between I/O modules and supply the power
• Up to two R80PS1 use is available
MODEL: R80PS1-R[1]
ORDERING INFORMATION
• Code number: R80PS1-R[1]
Specify a code from below for [1].
(e.g. R80PS1-R/Q)
• Specify the specification for option code /Q
(e.g. /C01)
POWER INPUT
DC power
R
: 24 V DC
(Operational voltage range: ±10 %; ripple 10 %p-p max.)
[1] OPTIONS
blank
: none
/Q
: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to our web site.)
/C01
: Silicone coating
/C02
: Polyurethane coating
CAUTION
OUTPUT CURRENT & NUMBER OF CONNECTABLE UNIT
It is NOT available to connect 16 of R80UST4 to power/network module because of limitation of output current of internal supply. The max. output current for internal supply of power/network module is 1.6 A.
The max. consumption current for internal supply of R80UST4 is 170 mA.
1.6 (A) < 170 (mA) x 16 = 2.72(A)
Inserting the R8-PS1 between 9th and 10th R80PS1 enables to connect 16 of R80UST4.
POWER UP
Turn the power on at the same time as the power/network module or turn the R80PS1 on before the power/network module turned on. If the R80PS1 is not turned on within 3 seconds after the power/network module is turned on, I/O modules are not correctly recognized
GENERAL SPECIFICATIONS
Connection
•
Power input, excitation supply
: Tension clamp (Front Twin connection)
Applicable wire size
: 0.2 - 1.5 mm
2
Stripped length
: 10 mm
•
Internal bus or internal power
: Via connector
Max. number of I/O modules
: 16
(Max. consumption current of I/O modules: 1.6 A)
Isolation
: Internal bus or internal power or power input to exc. supply to FE1
Power indicator LED
: Green LED turns on when the power is supplied.
INSTALLATION
Power consumption
•
DC
: Approx. 11 W 24 V DC (@ internal power max. current 1.6 A)
Internal power supply (power supply for I/O module)
:
• DC power supply: 5 V DC
• Current capacity: 1.6 A
Excitation supply output
(excitation for I/O module)
•
DC
: 24 V DC ±10 %
•
Operational current
: 8 A
(From power supply, exitation supply connector, via connector for internal bus, supplied to each I/O module. Power output current consumption must be under operational current.)
Operating temperature
: -10 to +55°C (14 to 131°F)
Operating humidity
: 10 to 90 %RH (non-condensing)
Atmosphere
: No corrosive gas or heavy dust
Mounting
: DIN rail
Weight
: 100 g (0.22 lb)
PERFORMANCE
Insulation resistance
: ≥ 100 MΩ with 500 V DC
Dielectric strength
: 1500 V AC @ 1 minute
(internal bus or internal power or power input to exc. supply to FE1)
STANDARDS & APPROVALS
EU conformity
:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EXTERNAL VIEW
CONNECTION DIAGRAMS
DIMENSIONS unit: mm (inch)
SCHEMATIC CIRCUITRY
Note: In order to improve EMC performance, bond the FE1 terminal to ground.
Caution: FE1 terminal is NOT a protective conductor terminal.