ES-9282 Rev.8
CLSA
CLAMP-ON CURRENT SENSOR
Functions & Features
•Easy-to-install, nylon spring-loaded, clamp-on type current sensor
•Over-voltage clamp element for safety in open circuit
•Wide frequency band
MODEL: CLSA–[1]
ORDERING INFORMATION
• Code number: CLSA-[1]
Specify a code from below for [1].
(e.g. CLSA-08)
Confirm the correct sensor type described on the data sheet of the combined transducer/transmitter module.
[1] INPUT
08
: 80 A
12
: 120 A
30
: 300 A
50
: 500 A
CAUTION
Before you remove the sensor module or mount it, turn off the input signal for safety. While the line is alive, the module’s cores, attracted to each other, may be hard to separate.
RELATED PRODUCTS
■ CLSA-08, 12, 30 and 50
• AC current input module (model: R3-CT4A)
• AC current input module (model: R3-CT8A)
• AC current input module (model: R5T-CTA)
• AC current transducer (model: 14CEC)
• AC current transducer (model: LTCEC)
• CT transmitter (model: CTC)
• High AC current transmitter (model: CTCS)
• CT transmitter (model: KCEC)
• AC current transmitter (model: M2CEC)
• CT transmitter (model: M5CTC)
• CT converter (model: M8CTC)
■ CLSA-08, 12
• Multi power input module (model: R3-WT1A)
• AC power input module (model: R3-WT4A)
•Special cable for CLSA-08, -12 (model: CLSA-08C-30)
GENERAL SPECIFICATIONS
Construction
: Clamp
Connection
CLSA-08, CLSA-12: Connector
(Connector model: SMR-02V-B)
CLSA-30, CLSA-50: Leadwire
Housing material
: Nylon
Applicable wire size
: AWG22 or thicker (Max. 30 meters, twisted)
Detachable number of times
: Approx. 100 times
INPUT SPECIFICATIONS
Max. working voltage
: 440 V AC (primary side)
(Refer to the instruction manual for detail.)
Operational range & overload capacity
(Operational range: Overload capacity)
CLSA-08: 80 A maximum 120 A continuous
CLSA-12: 120 A maximum 300 A continuous
CLSA-30: 300 A maximum 360 A continuous
CLSA-50: 500 A maximum 600 A continuous
Caution 1: The output values may vary depending on the accuracy of engagement at the clamp connection.
Caution 2: The sensor’s mechanical construction may cause it to generate resonance sound. However, it does not affect the perfomrance of the sensor.
INSTALLATION
Operating temperature
: -10 to +55°C (14 to 131°F)
Operating humidity
: 30 to 90 %RH (non-condensing)
Mounting
: Fix with a binding strap.
Weight
CLSA-08: 45 g (1.6 oz)
CLSA-12: 70 g (2.5 oz)
CLSA-30: 200 g (7.1 oz)
CLSA-50: 300 g (10.6 oz)
PERFORMANCE in percentage of span
Accuracy
: ±1 % (45 – 65 Hz)
±2 % (65.1 Hz – 1.2 kHz)
Insulation resistance
: ≥ 100 MΩ with 500 V DC
(sensor core to output)
Dielectric strength
: 1000 V AC @ 1 minute
(sensor core to output)
EXTERNAL DIMENSIONS unit: mm [inch]
■ Sensor model No.: CLSA-08
■ Sensor model No.: CLSA-12
■ Sensor model No.: CLSA-30
■ Sensor model No.: CLSA-50