ES-3117 Rev.9
BV
Space-saving Two-wire Signal Conditioners B-UNIT
SIGNAL TRANSMITTER
(non-isolated)
Functions & Features
• Converts a DC input into a standard 4 – 20 mA DC signal
• Monitor terminals
• High-density mounting
Typical Applications
• mV, voltage and current scaling
MODEL: BV–[1][2]
ORDERING INFORMATION
• Code number: BV-[1][2]
Specify a code from below for each of [1] and [2].
(e.g. BV-6/Q)
• Special input range (For codes Z & 0)
• Specify the specification for option code /Q
(e.g. /C01/S01)
[1] INPUT
Current
A
: 4 – 20 mA DC (Input resistance 250 Ω)
B
: 2 – 10 mA DC (Input resistance 500 Ω)
C
: 1 – 5 mA DC (Input resistance 1000 Ω)
D
: 0 – 20 mA DC (Input resistance 50 Ω)
E
: 0 – 16 mA DC (Input resistance 62.5 Ω)
F
: 0 – 10 mA DC (Input resistance 100 Ω)
G
: 0 – 1 mA DC (Input resistance 1000 Ω)
H
: 10 – 50 mA DC (Input resistance 100 Ω)
Z
: Specify current (See INPUT SPECIFICATIONS)
Voltage
2
: 0 – 100 mV DC (Input resistance approx. 100 kΩ)
3
: 0 – 1 V DC (Input resistance approx. 1 MΩ)
4
: 0 – 10 V DC (Input resistance approx. 2 MΩ)
5
: 0 – 5 V DC (Input resistance approx. 1 MΩ)
6
: 1 – 5 V DC (Input resistance approx. 1 MΩ)
0
: Specify voltage (See INPUT SPECIFICATIONS)
[2] OPTIONS
blank
: none
/Q
: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to our web site.)
/C01
: Silicone coating
/C02
: Polyurethane coating
/C03
: Rubber coating
TERMINAL SCREW MATERIAL
/S01
: Stainless steel
GENERAL SPECIFICATIONS
Construction
: Plug-in
Connection
: M3.5 screw terminals (torque 0.8 N·m)
Screw terminal
: Nickel-plated steel (standard) or stainless steel
Housing material
: Flame-resistant resin (black)
Zero adjustment
: -5 to +5 % (front)
Span adjustment
: 95 to 105 % (front)
INPUT SPECIFICATIONS
■
DC Current
:
Shunt resistor attached to the input terminals (0.5 W)
Specify input resistance value for code Z.
■
DC Voltage
: 0 – 300 V DC
Minimum span
: 0.1 V
Offset
: Max. 0.25 times span
Input resistance
Span 0.1 – 1 V: Approx. 100 kΩ
Span 1 – 10 V: Approx. 1 MΩ
Span ≥ 10 V: Approx. 2 MΩ
OUTPUT SPECIFICATIONS
Output
: 4 – 20 mA DC
Load resistance vs. supply voltage:
Load Resistance (Ω) = (Supply Voltage (V) – 12 (V))
÷ 0.02 (A) (including leadwire resistance)
INSTALLATION
Supply voltage
: 12 – 60 V DC
Operating temperature
: -5 to +60°C (23 to 140°F)
Operating humidity
: 30 to 90 %RH (non-condensing)
Mounting
: Surface or DIN rail; Standard Rack Mounting Frame BX-16H available
Weight
: 150 g (0.33 lb)
PERFORMANCE in percentage of span
Accuracy
: ±0.1 %
Temp. coefficient
: ±0.05 %/°C (±0.03 %/°F)
Response time
: ≤ 0.5 sec. (0 – 90 %)
EXTERNAL DIMENSIONS unit: mm [inch]
TERMINAL ASSIGNMENTS unit: mm [inch]
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM