ES-9655 Rev.0
R8-PAT4F
Remote I/O R8 Series
HIGH-SPEED TOTALIZED PULSE INPUT MODULE, 4 points
(NPN input)
Functions & Features
• Space-saving remote I/O module of 4 points input pulse counter
• Each channel is atachable/detachable independently with separable tension clamp terminal
MODEL: R8–PAT4FA[1]
ORDERING INFORMATION
• Code number: R8-PAT4FA[1]
Specify a code from below for [1].
(e.g. R8-PAT4FA/Q)
• Specify the specification for option code /Q
(e.g. /C01)
INPUT
A
: NPN input
[1] OPTIONS
blank
: none
/Q
: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to our web site.)
/C01
: Silicone coating
/C02
: Polyurethane coating
RELATED PRODUCTS
• PC Configurator cable (model: MCN-CON or COP-US)
• PC configurator software (model: R8CFG)
Downloadable at our web site.
Note: When using with Power/Network module (model: R8-NECT1), firmware version Ver1.50 or later is supported.
GENERAL SPECIFICATIONS
Connection
•
Input
: Separable tension clamp terminal
•
Excitation supply, internal bus
:
Connected to internal bus connector
•
Internal power
: Via bus connector
Isolation
: Input or exc. supply to internal bus or internal power
Module address
: With rotary switch
Terminating resistor
: Built-in (DIP Switch, default: disable)
Status indicator
: Bi-color (red/green) LED; Refer to the instruction manual.
Input status indicator
: Green LED; Refer to the instruction manual.
INPUT SPECIFICATIONS
Common
: Positive common (NPN) per 4 points
Number of inputs
: 4
I/O status indicator
: LED turns on with closed contact.
∙
NPN input
(internal supply with excitation supply input from network power module)
Rated load voltage
: 24 V DC ±10 %; ripple 5 %p-p max.
ON voltage / ON current
: ≥ 16 V DC (input terminal to COM) / ≥ 7.2 mA
OFF voltage / OFF current
: ≤ 6 V DC (input terminal to COM) / ≤ 2.5mA
Input current
: 11.2 mA / point (@24 V DC)
Input resistance
: Approx. 2 kΩ
Max. Frequency
: 10 kHz
Min. pulse width requirement
: 20 μsec. for both ON and OFF
Accumulated pulse count
: 0 - 4 294 967 295
Max. accumulable pulse
: 1 - 4,294,967,295 (factory setting: 4,294,967,295)
Overflow reset value
: 0 or 1 (factory setting: 0)
INSTALLATION
Max. current consumption
: 90 mA
Operating temperature
: -10 to +55°C (14 to 131°F)
Operating humidity
: 30 to 90 %RH (non-condensing)
Atmosphere
: No corrosive gas or heavy dust
Mounting
: DIN rail
Weight
: 80 g (2.8 oz)
PERFORMANCE
Data allocation
: 2
Module addresses in use
: 4
Power output (input
connector
)
: Rated current 0.1 A DC per channel (rated current 3 A for internal fuse (slow blow fuse i
2
t (A
2
sec.) max. 0.31); Total: 0.4 A DC
Input data update period
: 10 msec.
Insulation resistance
: ≥ 100 MΩ with 500 V DC
Dielectric strength
: 1500 V AC @ 1 minute
(input or exc. supply to internal bus or internal power to ground)
STANDARDS & APPROVALS
EU conformity
:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EXTERNAL VIEW
WIRING
■ SEPARABLE TENSION CLAMP TERMINAL
Unit side connector:
MG's product
Cable side connector
: DFMC1,5/2-ST-3,5 (Phoenix Contact) (included in the package)
Applicable wire size
: 0.2 - 1.5 mm
2
Stripped length
: 10 mm
Recommended solderless terminal
• AI0,25-10YE 0.25 mm
2
(Phoenix Contact)
• AI0,34-10TQ 0.34 mm
2
(Phoenix Contact)
• AI0,5-10WH 0.5 mm
2
(Phoenix Contact)
• AI0,75-10GY 0.75 mm
2
(Phoenix Contact)
• A1-10 1.0 mm
2
(Phoenix Contact)
• A1,5-10 1.5 mm
2
(Phoenix Contact)
OPERATING MODE SETTING
(*) Factory setting
EXTERNAL DIMENSIONS unit: mm [inch]
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM