ES-7347 Rev.2
BA8NS-CONV
SPE Remote I/O BA8 Series
SPE CONVERTER
Functions & Features
• Equipped with SPE (10BASE-T1L) and LAN (RJ-45) ports.
• Modbus/TCP transparent.
MODEL: BA8NS-CONV-[1]
ORDERING INFORMATION
• Code number: BA8NS-CONV-[1]
Specify a code from below for [1].
(e.g. BA8NS-CONV-M2)
[1] POWER INPUT
AC Power
M2
: 100 – 240 V AC (Operational voltage range 85 – 264 V,
47 – 66 Hz)
DC Power
R
: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
GENERAL SPECIFICATIONS
Construction
: Stand-alone
Connection:
· Power
Unit side connector
: MSTB2,5/3-G (Phoenix Contact)
Cable side connector
: MSTB2,5/3-ST (Phoenix Contact)
Applicable wire size
: 0.2 - 2.5mm
2
, stripped length 7mm
· LAN
Modular jack for 10BASE-T / 100BASE-TX (RJ-45)
· 10BASE-T1L
Unit side connector
: in-house made
Applicable connector
: DFMC1,5/2-ST-3,5 (Phoenix Contact) (included in the package)
Applicable wire size
: 0.2 - 1.5mm
2
, stripped length 10mm
Isolation
: LAN to SPE to power to FE
COMMUNICATION
Number of connected client:
1
■
Ethernet
Communication standard
: IEEE 802.3u
Transmission type
: 10BASE-T, 100BASE-TX
Transmission speed
: 10/100 Mbps
(Auto Negotiation)
Transmission media
:
10BASE-T (STP cable; Category 5)
100BASE-TX (STP cable; Category 5e)
Maximum segment length
: 100 meters
■ 10BASE-T1L
Communication standard
: IEEE 802.3cg
Transmission speed
: 10 Mbps
Transmission media
: CAT5 2-wire twisted-pair
Maximum segment length
: 1000 meters (standard value)
INSTALLATION
Power consumption
•
AC
:
Approx. 1.8 VA at 100 V
Approx. 2.3 VA at 200 V
Approx. 3 VA at 264 V
•
DC
: Approx. 0.8 W
Operating temperature
: -10 to +55°C (14 to 131°F)
Operating humidity
: 10 to 90 %RH (non-condensing)
Ambience
: No corrosive gas or heavy dust; no strong electric/magnetic field; no direct effect of vibration or physical impact
Mounting
: DIN rail
Weight
: 100 g (0.22 lb)
PERFORMANCE
Insulation resistance
: ≥ 100 MΩ with 500 V DC
Dielectric strength
: 1500 V AC @1 minute
(LAN or SPE to power to FE)
500 V AC @ 1 minute (LAN to SPE)
REFERENCE DATA
The data shown below are of individual test pieces and do not guarantee all values.
· 10BASE-T1L transmission distance test
Used cable 1
Category 6 twisted pair cable from ELECOM
LD-CT6
Transmission distance
: 970 m
Communication establishment time
: Approx. 7 sec.
Used cable 2
Electric button telephone cable from TSUKO DKT-Q0.5-2P
Transmission distance
: 600 m
Communication establishment time
: Approx. 0.5 sec.
EXTERNAL VIEW
COMMUNICATION CABLE WIRING
EXTERNAL DIMENSIONS unit: mm [inch]
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM