ES-7346 Rev.1
BA8NS-HUB
SPE Remote I/O BA8 Series
SPE REPEATER
Functions & Features
• Equipped with SPE (10BASE-T1L) port
• Dedicated repeater for SPE Remote I/O products of MG Co., Ltd.
MODEL: BA8NS-HUB-[1][2]
ORDERING INFORMATION
• Code number: BA8NS-HUB-[1][2]
Specify a code from below for each of [1] and [2].
(e.g. BA8NS-HUB-R/CE/1)
[1] POWER INPUT
AC Power
M2
: 100 – 240 V AC
(Operational voltage range 85 – 264 V, 47 – 66 Hz)
(‘/CE’ is not selectable for ‘Standards & Approvals’ code)
DC Power
R
: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
[2] OPTIONS (multiple selections)
Standards & Approvals
blank
: Without CE
/CE
: CE marking
Program Version (must be specified)
/1
RELATED PRODUCTS
• SPE Converter (model: BA8NS-CONV)
GENERAL SPECIFICATIONS
Construction
: Stand-alone
Connection:
• Power
Unit side connector
: MSTB2,5/3-G (Phoenix Contact)
Cable side connector
: MSTB2,5/3-ST (Phoenix Contact)
Applicable wire size
: 0.2 - 2.5mm
2
, stripped length 7mm
• 10BASE-T1L
Unit side connector
: in-house made
Applicable connector
: DFMC1,5/2-ST-3,5 (Phoenix Contact)
(included in the package)
Applpicable wire size
: 0.2 - 1.5mm
2
, stripped length 10mm
Isolation
: SPE to power to FE
COMMUNICATION
Number of port:
4
■ 10BASE-T1L
Communication standard
: IEEE 802.3cg
Transmission speed
: 10 Mbps
Transmission media
: CAT5 2-wire twisted-pair
Maximum segment length
: 1000 meters (standard value)
INSTALLATION
Power consumption
•
AC
:
Approx. 2.2 VA at 100 V
Approx. 2.7 VA at 200 V
Approx. 3.3 VA at 264 V
•
DC
: Approx. 1 W
Operating temperature
: -10 to +55°C (14 to 131°F)
Operating humidity
: 10 to 90 %RH (non-condensing)
Ambience
: No corrosive gas or heavy dust; no strong electric/magnetic field; no direct effect of vibration or physical impact
Mounting
: DIN rail
Weight
: 110 g (0.24 lb)
PERFORMANCE
Insulation resistance
: ≥ 100 MΩ with 500 V DC
Dielectric strength
: 1500 V AC @1 minute
(SPE to power to FE)
REFERENCE DATA
The data shown below are of individual test pieces and do not guarantee all values.
•
10BASE-T1L transmission distance test
Used cable 1
Category 6 twisted pair cable from ELECOM
LD-CT6
Transmission distance
: 970 m
Communication establishment time
: Approx. 7 sec.
Used cable 2
Electric button telephone cable from TSUKO DKT-Q0.5-2P
Transmission distance
: 600 m
Communication establishment time
: Approx. 0.5 sec.
STANDARDS & APPROVALS
EU conformity
:
EMC Directive
EN 63044-5-1, EN 63044-5-3
RoHS Directive
EXTERNAL VIEW
COMMUNICATION CABLE WIRING
EXTERNAL DIMENSIONS unit: mm [inch]
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Note: In order to improve EMC performance, bond the FE terminal to ground.
Caution: FE terminal is NOT a protective conductor terminal.