ES-8581 Rev.7

RGP30

RGP30 Series

REMOTE GRAPHIC PANEL

(with HDMI® output)
Functions & Features
• Fulfills the function of display units using Web technology without dedicated displays.
• Supports Modbus/TCP and SLMP for connecting with various PLCs.
• Equipped with Web server which allows access via network and displays Web screen on browser of the user's terminal.
• Equipped with HDMI connector for connecting with an HDMI monitor.
• Facilitates creation of Graphic Panels with Designing Software (model: RGP-Designer).
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

MODEL: RGP30-[1]-R[2]

ORDERING INFORMATION

• Code number: RGP30-[1]-R[2]
Specify a code from below for each of [1] and [2].
  (e.g. RGP30-N-R/E)

[1] TYPE

N: Standard
W: For power (Standard with power monitor screen)

POWER INPUT

DC power
R: 24 V DC
(Operational voltage range: ±10 %; ripple 10 %p-p max.)

[2] OPTIONS

OS Language
Blank: Japanese
/E: English

RELATED PRODUCTS

• Graphic Panel Designing Software for RGP30 Series
(model: RGP-Designer)
• Local certification authority creator (model: LCA-RGP)
Software is downloadable at our web site.
• SD card (Only for RGP30-W)
An SD card is required to store data in the unit.
Use an SD card of the designated model number which is available commercially and from us.
  - Hagiwara Solutions NSD6-004GH(B21SEI

GENERAL SPECIFICATIONS

Connection
• Power supply: Spring clamp terminal block
  Applicable wire size: 0.2 - 2.5 mm2
  Stripped length: 10 mm
  Recommended solderless terminal
  AI0,25-10YE 0.25 mm2 (Phoenix Contact)
  AI0,34-10TQ 0.34 mm2 (Phoenix Contact)
  AI0,5-10WH 0.5 mm2 (Phoenix Contact)
  AI0,75-10GY 0.75 mm2 (Phoenix Contact)
  AI1-10RD 1.0 mm2 (Phoenix Contact)
  AI1,5-10BK 1.5 mm2 (Phoenix Contact)
  AI2,5-10BU 2.5 mm2 (Phoenix Contact)
• Ethernet: RJ-45 connector
• USB: USB type A connector
• HDMI: HDMI type A connector
Housing material: Flame-resistant resin (gray)
Isolation: Ethernet to USB or HDMI or internal power or power supply to FE
Indicator LEDs: POWER, RUN, ERROR
(Refer to the instruction manual for details)

CONTROL CIRCUIT

CPU: Intel Atom E3827 (Dual Core 1.75 GHz)
Memory: 2 GB DDR3K-1333
Internal storage: 30 GB
OS: Microsoft Windows 10 IoT Enterprise 2016 LTSB

ETHERNET COMMUNICATION

Communication Standard: IEEE 802.3u
Transmission: 10BASE-T / 100BASE-TX
Baud rate: 10 / 100 Mbps (Auto Negotiation function)
Protocol: TCP/IP, Modbus/TCP, SLMP, HTTPS, HTTP
Transmission media: 10BASE-T (STP, Category 5) 
                                  100BASE-TX (STP, Category 5e)
Max. length of fieldbus segment: 100 meters
Ethernet Status LED: ACT, LNK
IP address: 192.168.0.1 (Ex-factory setting)

USB

Specification: USB 2.0
No.of ports: 2
Transmission distance: 5 meters max.
Power supply capability: 5V DC±10%, 500mA DC max.

HDMI

Max. resolution: 1920 x 1080
Frame rate: 60 Hz
Transmission distance: 5 meters max.
Applicable cable: Standard HDMI cable (Ver.1.4 or later)

INSTALLATION

Power consumption : Approx. 18 W
Operating temperature: -10 to +50°C (14 to 122 °F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: DIN rail
Weight: 400 g (0.88 lb)

PERFORMANCE

Calendar clock (with battery backup): 
 Accuracy: Monthly deviation of ≤ 3 minutes at 25°C or 77 °F
 Back up period: Approx. 10 years at 25°C or 77 °F
 Battery: Primary lithium battery (non-removable)
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute (Ethernet to USB or HDMI or internal power or power supply to FE)

EXTERNAL VIEW

■ FRONT VIEW

EXTERNAL DIMENSIONS unit: mm [inch]

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Caution: FE terminal is NOT a protective conductor terminal.

DISPLAY FUNCTION

● No.of GP (Graphic Panels) for simultaneous display: Max.8
● Screen size: VGA (640*480), SVGA (800*600), XGA (1024*768), SXGA (1280*1024), HD (1280*720), FHD (1920*1080), Custom
● No. of screens: Max. 1024 for 8 GPs in total  
● No. of parts: Max.1024 on a single screen
● Parts for screens:
• Shape (Rectangle, Circle, Line, Picture)
• Character string (Variable, fixed)
• Lamp/switch (Bit/Word)
• Data display
• Gauge
• Screen display frame
• [Change screen] switch

LOWER COMMUNICATION

■ Modbus/TCP master
RGP30 can connect with R3 or R7 series remote I/Os for I/O expansion and collectively handle data acquired from multiple remote measuring points.
● Connectable devices (Modbus slave)
• R3-NE1
• R5-NE1
• R6-NE2
• R7E series
• 72EM2-M4
• DL8
• TR30
• DL30
• R30NE1
• Yokogawa FA-M3 (F3SP71-4S)
• GR8-EM
● Connectable power measuring devices
(Modbus slave, only for RGP30-W)
• R7EWTU
• R7MWTU
• R9EWTU
• R9MWTU
• M5XWT
• M5XWTU
• M50XWTU
• M50EXWTU
• 53U
• 54U
• L53U
■ SLMP client
RGP30 can connect with SLMP-compatible MELSEC CPU units for I/O expansion and collectively handle data acquired from multiple remote measuring points.
● Connectable devices (SLMP)
• MELSEC iQ-R Series
• MELSEC iQ-F Series
• MELSEC Q Series
● No. of connectable devices (No. of slaves)
  32 nodes (selectable from Modbus/TCP and SLMP devices)
  No. of connectable power measuring devices: 64 (only for 
  RGP30-W)

HOST COMMUNICATION (ONLY RGP30-W)

■ Modbus/TCP slave
Power data during measurement can be exported.
● Connectable devices (Modbus master)
• RGP30
• RGP6
• DL8
• DL30
• TR30
• JC-IO
● No. of connectable devices: 4

WEB SERVER

RGP30 works as a Web server and fulfils the function of display units.
● Compatible terminals and browsers
• iPad (iPad OS 18.4.1): Safari
• iPhone (iOS 18.4.1): Safari
• Android tablet (Android 15): 
  Google Chrome 135.0
• Windows PC (Windows 10, 11): 
  Microsoft Edge 135.0
  Google Chrome 135.0
  Firefox 137.0
● No. of connectable terminals: 8
● Protocol
• HTTP
• HTTPS
Certificate can be created using Local certification authority creator (model: LCA-RGP).

GRAPHIC PANEL DESIGN

Create Graphic Panels using Graphic Panel Designing Software for RGP30 Series (model: RGP-Designer).

SYSTEM CONFIGURATION EXAMPLES