ES-9636 Rev.0
R8Y-DAZH16A
Remote I/O R8 Series
NPN DISCRETE INPUT MODULE, 16 points
Functions & Features
• 16 channels for discrete input, compact size remote I/O module
• 20 pins (10 pins×2) ZH connector (Japan Solderless Terminal MFG.Co.Ltd)
MODEL: R8Y–DAZH16A[1]
ORDERING INFORMATION
• Code number: R8Y-DAZH16A[1]
Specify a code from below for [1].
(e.g. R8Y-DAZH16A/Q)
• Specify the specification for option code /Q
(e.g. /C01)
[1] OPTIONS
blank
: none
/Q
: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to our web site.)
/C01
: Silicone coating
/C02
: Polyurethane coating
RELATED PRODUCTS
• ZH connector cable (model: ZHCL)
The use of this cable is not mandatory.
GENERAL SPECIFICATIONS
Connection
•
Input
: 10-pin ZH connector
Unit side connector:
S10B-ZR (Japan Solderless Terminal MFG.Co.Ltd)
Recommended socket:
ZHR-10 (Japan Solderless Terminal MFG.Co.Ltd)
Recommended contact:
SZH-002T-P0.5 (Japan Solderless Terminal MFG.Co.Ltd)
Applicable wire size:
AWG28-26
(The socket and contact are not included in the package. Refer to the specifications of the product.)
•Excitation supply, internal bus
:
Connected to internal bus connector
•
Internal power
: Supplied from internal bus connector
Isolation
: Input or exc. supply to internal bus or internal power
Module address
: With DIP switch
Terminating resistor
: Built-in (DIP Switch, default: disable)
Status indicator
: Bi-color (red/green) LED; Refer to the instruction manual.
INPUT SPECIFICATIONS
Common
: Positive common (NPN)
Number of input
: 16 points
Maximum inputs applicable at once
: No limit (at 24 V DC)
Rated input voltage
: 24 V DC ±10 %, ripple 5 %p-p max.
ON voltage / current
: ≥ 15 V DC (input – 24V) / ≥ 2.3 mA
OFF voltage / current
: ≤ 5 V DC (input – 24V) / ≤ 1 mA
Input current
: ≤ 4.5 mA per point (at 24 V DC)
Input resistance
: Approx. 5.7 kΩ
ON delay
: ≤ 2.0 msec.
OFF delay
: ≤ 2.0 msec.
INSTALLATION
Max. current consumption
: 100 mA
Operating temperature
: -10 to +55°C (14 to 131°F)
Operating humidity
: 30 to 90 %RH (non-condensing)
Atmosphere
: No corrosive gas or heavy dust
Mounting
: DIN rail
Weight
: 100 g (0.22 lb)
PERFORMANCE
Data allocation
: 1
Module addresses in use
: 1
Excitation supply (input connector)
: Rated current 1.5 A DC, 0.75 A DC per 1 connector (rated current 3A for internal fuse (slow blow fuse)).
Insulation resistance
: ≥ 100 MΩ with 500 V DC
Dielectric strength
: 1500 V AC @ 1 minute
(input or exc. supply to internal bus or internal power to ground)
STANDARDS & APPROVALS
EU conformity
:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EXTERNAL VIEW
OPERATING MODE SETTING
(
*
) Factory setting
Note: Be sure to set unused SW1-7 to OFF.
EXTERNAL DIMENSIONS unit: mm [inch]
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM