ES-9638 Rev.0
R8Y-DCZH8A
Remote I/O R8 Series
NPN TRANSISTOR OUTPUT MODULE, 8 points
Functions & Features
• 8 channels for discrete output, compact size remote I/O module
• 10 pins ZH connector (Japan Solderless Terminal MFG.Co.Ltd)
MODEL: R8Y–DCZH8A[1]
ORDERING INFORMATION
• Code number: R8Y-DCZH8A[1]
Specify a code from below for [1].
(e.g. R8Y-DCZH8A/Q)
• Specify the specification for option code /Q
(e.g. /C01)
[1] OPTIONS
blank
: none
/Q
: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to our web site.)
/C01
: Silicone coating
/C02
: Polyurethane coating
RELATED PRODUCTS
• ZH connector cable (model: ZHCL)
The use of this cable is not mandatory.
GENERAL SPECIFICATIONS
Connection
•
Output
: 10-pin ZH connector
Unit side connector:
S10B-ZR (Japan Solderless Terminal MFG.Co.Ltd)
Recommended socket:
ZHR-10 (Japan Solderless Terminal MFG.Co.Ltd)
Recommended contact:
SZH-002T-P0.5 (Japan Solderless Terminal MFG.Co.Ltd)
Applicable wire size:
AWG28-26
(The socket and contact are not included in the package. Refer to the specifications of the product.)
•Excitation supply, internal bus:
Connected to internal bus connector
•
Internal power
: Supplied from internal bus connector
Isolation
: Output or exc. supply to internal bus or internal power
Module address
: With DIP switch
Output at the loss of communication
: With the side DIP SW
Terminating resistor
: Built-in (DIP Switch, default: disable)
Status indicator
: Bi-color (red/green) LED; Refer to the instruction manual.
OUTPUT SPECIFICATIONS
Common:
Negative common (NPN)
8 points per common
Maximum outputs applicable at once:
No limit
Number of output
: 8 points
Rated load voltage
: 24 V DC ±10 %
Rated output current
: 100 mA per point, 0.8 A per common
Residual voltage
: ≤ 0.2 V
Leakage current
: ≤ 0.05 mA
ON delay:
≤ 0.5 msec.
OFF delay:
≤ 1.5 msec.
(When driving an inductive load, connect a diode in parallel with the load.)
INSTALLATION
Max. current consumption
: 100 mA
Exc. supply
current consumption
: 0.8 A
Operating temperature
: -10 to +55°C (14 to 131°F)
Operating humidity
: 30 to 90 %RH (non-condensing)
Atmosphere
: No corrosive gas or heavy dust
Mounting
: DIN rail
Weight
: 100 g (0.22 lb)
PERFORMANCE
Data allocation
: 1
Module addresses in use
: 1
Insulation resistance
: ≥ 100 MΩ with 500 V DC
Dielectric strength
: 1500 V AC @ 1 minute
(output or exc. supply to internal bus or internal power to ground)
STANDARDS & APPROVALS
EU conformity
:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EXTERNAL VIEW
OPERATING MODE SETTING
(*) Factory setting
EXTERNAL DIMENSIONS unit: mm [inch]
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM