ES-2440 Rev.0
IT60SRE2
Tower Light Series
ETHERNET TOWER LIGHT
(small size, 60 mm dia., Modbus/TCP, 1 - 5 layers)
Functions & Features
• Lighting, blinking and buzzing available with PLC or PC via Modbus/TCP.
MODEL: IT60SRE2-[1][2][3][4][5][6]D1-[7][8]
ORDERING INFORMATION
• Code number: IT60SRE2-[1][2][3][4][5][6]D1-[7][8]
Specify a code from below for each of [1] through [8].
(e.g. IT60SRE2-5RYGBWD1-M2/Q)
• Specify the specification for option code /Q
(e.g. /C01)
[1] LAMP LAYERS
1
: 1 layer
2
: 2 layers
3
: 3 layers
4
: 4 layers
5
: 5 layers
[2] LAMP 1 COLOR
(1st layer from the top)
R
: Red
Y
: Amber
G
: Green
B
: Blue
W
: White
[3] LAMP 2 COLOR
(2nd layer from the top)
R
: Red
Y
: Amber
G
: Green
B
: Blue
W
: White
N
: None (not available when Lamp Layers selected are 2 - 5)
[4] LAMP 3 COLOR
(3rd layer from the top)
R
: Red
Y
: Amber
G
: Green
B
: Blue
W
: White
N
: None (not available when Lamp Layers selected are 3 - 5)
[5] LAMP 4 COLOR
(4th layer from the top)
R
: Red
Y
: Amber
G
: Green
B
: Blue
W
: White
N
: None (not available when Lamp Layers selected are 4 - 5)
[6] LAMP 5 COLOR
R
: Red
Y
: Amber
G
: Green
B
: Blue
W
: White
N
: None (not available when Lamp Layers selected are 5)
* Select "None" option for the layers other than the selected.
MOUNTING
D
: Direct mounting
DESIGN TYPE
1
: Type 1
(refer to outline dimensions)
[7] POWER INPUT
AC Power
M2
: 100 – 240 V AC (Operational voltage range 85 – 264 V,
47 – 66 Hz)
DC Power
R
: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
[8] OPTIONS
blank
: none
/Q
: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to our web site.)
/C01
: Silicone coating
/C02
: Polyurethane coating
/C03
: Rubber coating
RELATED PRODUCTS
• LAN cable (model: ITCA)
• Mounting Pole (model: ITPL, ITB, ITP, ITW and ITS)
• Mounting Adapter (model: ITAD1, ITAM, ITAR and ITAW)
Access to 192.168.0.1, the factory default setting, to set the device first time.
GENERAL SPECIFICATIONS
Degree of protection
: IP 65, vertical mounting only (bottom connectors excluded)
Connection
Power
:UL1007 AWG20
Network
: RJ-45 Modular Jack
Housing material
: Flame-resistant resin
Lens
: Flame-resistant resin (transparent)
Isolation
: Network to power input to FE1 (Functional Earth)
DIP SW Setting
: Frequency of lamp blinking and buzzing discontinuance, buzzing volume level, output at connection failed and IP address (refer to the instruction manual)
Lamp
: Red, amber, green, blue and white LEDs
on/blinking (approx. 2 Hz, 10 Hz)
Status indicator LEDs
: Power, Run
(Refer to the insruction manual)
Buzzing
: Approx. 3.3 kHz
Interval
: continuous/intermittent (approx. 2 Hz, 10 Hz)
COMMUNICATION
Communication Standard
: IEEE 802.3u
Transmission
: 10BASE-T, 100BASE-TX
Baud rate
: 10/100 Mbps (Auto Negotiation function)
Protocol
: Modbus/TCP
Data:
RTU (Binary)
Port No.:
502
Max. number of socket connections
: 2
Transmission media
: 10BASE-T (STP, Category 5)
100BASE-TX (STP, Category 5e)
Max. length of fieldbus segment
: 100 meters
IP address
: 192.168.0.1 (factory setting);
Selectable with the Web browser (rotary switch: 00H)
Only the host address of IP address is selectable with rotary switch (rotary switch: 01H - FEH)
DHCP client function (rotary switch: FFH)
Ethernet indicator LED
: Link1, Link2, Link100
INSTALLATION
Power consumption
•
AC
:
Approx. 10 VA at 100 V with max. load
Approx. 13 VA at 200 V with max. load
Approx. 14 VA at 240 V with max. load
•
DC
: Approx. 6 W
Operating temperature
: -10 to +55°C (14 to 131°F)
Operating humidity
: 30 to 90 %RH (non-condensing)
Atmosphere
: No corrosive gas
Mounting
: Direct mounting
Mounting direction
: Vertical
Weight
: 750 g (1.65 lb)
PERFORMANCE
Insulation resistance
: ≥ 100 MΩ with 500 V DC
Dielectric strength
: 1500 V AC @ 1 minute
(network to power to FE1)
STANDARDS & APPROVALS
Refer to the manuals to comply with the standards.
EU conformity
:
EMC Directive
EN 60947-5-1
Low Voltage Directive
EN 60947-5-1
Installation Category II (power)
Pollution degree 2
Network to power: Reinforced insulation (300 V)
RoHS Directive
WEB BROWSER SETTING
The following parameter items can be set by using Web browser.
EXTERNAL VIEW
EXTERNAL DIMENSIONS unit: mm
MOUNTING REQUIREMENTS unit: mm
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM