ES-4651 Rev.0

PLC8-NE

Controller PLC8 Series

PLC

Functions & Features
• Controller of PLC8 series
• Port for LAN (RJ-45)

MODEL: PLC8-NE-[1][2][3][4]-R[5]

ORDERING INFORMATION

• Code number: PLC8-NE-[1][2][3][4]-R[5]
Specify a code from below for each of [1] through [5].
(e.g. PLC8-NE-CIOP-R/Q)
• Specify the specification for option code /Q
(e.g. /C01)
* 1. Do not specify duplicate protocols in PLC additional protocols 1 to 4.
* 2. When codes are specified in PLC additional protocols 1 to 4, specify the codes in the order of C, I, O, P, N.
e.g.) When the codes C, O and P are specified:
PLC8-NE-POCN-R (cannot be specified)
PLC8-NE-COPN-R (can be specified)

[1] PLC ADDITIONAL PROTOCOL 1

C: CODESYS EtherCAT Master
I: CODESYS EtherNet/IP Scanner/Adapter
O: CODESYS OPC UA Server/Client/PubSub
P: CODESYS PROFINET Controller/Device
N: None

[2] PLC ADDITIONAL PROTOCOL 2

The selectable codes are the same as PLC additional protocol 1.

[3] PLC ADDITIONAL PROTOCOL 3

The selectable codes are the same as PLC additional protocol 1.

[4] PLC ADDITIONAL PROTOCOL 4

The selectable codes are the same as PLC additional protocol 1.

POWER INPUT

DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[5] OPTIONS

blank: none
/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to our web site.)
/C01: Silicone coating
/C02: Polyurethane coating

Functions & Features

PLC8-NE is used with interface module (model: PLC8-MD1 etc.) or I/O modules (model: PLC8-DAC4 etc.). Be sure to use an end module (model: PLC8-END).
■ SYSTEM SETTING
The following settings can be configured on Web browser.
Network setting: IP address, Subnet mask, Default gateway, DHCP client, DHCP server, Network filter
Time setting: manual / PC / NTP
System setting: service control, software update, initialization / backup / restoring of setting, system control
Equipped with CODESYS Runtime, Web Visualization

RELATED PRODUCTS

· Remote I/O PLC8 Series
· End module (model: PLC8-END)
• EDS file
EDS file is required to use the device with I/O modules.
• Programming tool (model: C-CDS35)
EDS file and the programming tool are downloadable at our website.
• SD card
An SD card is required to store the data.
- SC memory card 2.0 (SDHC card) is available
- Format: FAT32
Use the specified model number of SD card.
- Hagiwara Solutions MSDB-016GS(V01SLS
Available for purchase from us. Consult us.

PACKAGE INCLUDES...

• Protective cover

GENERAL SPECIFICATIONS

Connection:
• Power input:
Device side connector: MC1,5/3-G-5,08 (Phoenix Contact)
Cable side connector: MC1,5/3-ST1-5,08 (Phoenix Contact)
Applicable wire size: 0.08 - 1.5mm², stripped length 7mm
• LAN1
Modular jack for 10BASE-T / 100BASE-TX (RJ-45)
• LAN2
Modular jack for 100BASE-TX / 1000BASE-TX (RJ-45)
• Internal bus, internal power, exc. supply: Connected to internal bus connector
Housing material: Flame-resistant resin (gray)
Number of connectable related devices: up to 8
Isolation: LAN1 to LAN2 to power to FE
Status indicator LED: RUN, ERR, SD, PLC, USR

Ethernet PORT

Standard: IEEE 802.3u
Transmission type: 100BASE-T (LAN1 only) /
100BASE-TX/1000BASE-TX (LAN2 only)
Baud rate: 10/100/1000 Mbps (Auto Negotiation function,
10 Mbps is only LAN1, 1000 Mbps is only LAN2)
Transmission media: 10BASE-T (STP, Category 5),
100BASE-TX (STP, Category 5e),
1000BASE-TX (STP, Category 6)
Max. segment length: 100 meters
Status indicator LED: ACT, LNK
LAN1 IP address (factory setting): 192.168.1.200
LAN2 IP address (factory setting): 192.168.2.200

SOFTWARE LOGIC PROGRAMMING

Standard: IEC 61131-3
Language: Function Block Diagram (FBD), Instruction List (IL), Ladder Diagram (LD), Structured Text (ST), Continuous Function Chart (CFC), Sequential Function Chart (SFC)
Usable IEC data type: BOOL, BYTE, WORD, DWORD, LWORD, SINT, USINT, INT, UINT, DINT, UDINT, LINT, ULINT, REAL, LREAL, STRING, WSTRING, Time, Array, Structure, etc.
Program capacity: program 32 MB max., data 128 MB max., source 32 MB max.
Nonvolatile memory area: 160 KB
(RETAIN 128 KB, persistent memory 32 KB)

CODESYS EtherCAT SPECIFICATION

Port: LAN1
Standard: IEEE 802.3u
Transmission type: 100BASE-TX
Baud rate: 100 Mbps (Auto Negotiation function)
Transmission media: STP, Category 5e
Max. segment length: 100 meters

CODESYS EtherNet/IP SPECIFICATION

Port: LAN1
Standard: IEEE 802.3u
Transmission type: 10BASE-T/100BASE-TX
Baud rate: 10/100 Mbps (Auto Negotiation function)
Transmission media: STP, Category 5 (10BASE-T),
STP, Category 5e (100BASE-TX)
Max. segment length: 100 meters

CODESYS OPC UA SPECIFICATION

CODESYS PROFINET SPECIFICATION

INSTALLATION

Power consumption
•DC at 24 V DC: approx. 38.4 W
(at internal power max. current 1.4 A,
at exc. supply max. current 1.1 A)
≤ 4.5 W (only the device)
Internal power
• DC power supply: 5 V DC
• Current capacity: 1.4 A
(The internal power is generated from the power supply and distributes to I/O modules. The current consumption of the internal power must be within the current capacity.)
Excitation supply output
• DC: 24 V DC ±10 %
• Current capacity: 1.1 A

(I/O modules are provided through the internal bus connector from the power supply connector. The current consumption of the exc. supply must be within the current capacity.)
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 10 to 90 %RH (non-condensing)
Ambience: No corrosive gas or heavy dust; no strong electric/magnetic field; no direct effect of vibration or physical impact
Mounting: DIN rail (Use a resin DIN rail mounting stopper for safety.)
Weight: 320 g (0.71 lb)

PERFORMANCE

RTC (Real time clock) module: Monthly deviation of 60 sec. at 25°C or 77 °F
Back up period: Approx. 10 years
Battery: Primary lithium battery (non-removable)
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute
(LAN1 to LAN2 to power to FE)

EXTERNAL VIEW

CONNECTION DIAGRAMS

EXTERNAL DIMENSIONS unit: mm [inch]

■ DEVICE

■PROTECTIVE COVER

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Caution: FE terminal is NOT a protective conductor terminal.