ES-4652 Rev.1

PLC8-DAC4

Remote I/O PLC8 Series

DISCRETE INPUT OUTPUT MODULE

(Di 2 points (internal power), Do 2 points (photo MOSFET relay))
Functions & Features
• 2 channels for discrete input and 2 channels for discrete output, compact size remote I/O module 
• Tension clamp connector

MODEL: PLC8-DAC4[1]

ORDERING INFORMATION

• Code number: PLC8-DAC4[1]
Specify a code from below for [1].
  (e.g. PLC8-DAC4/1/Q)
• Specify the specification for option code /Q
  (e.g. /C01)

[1] OPTIONS (multiple selections)

Program Version (must be specified)
/1: 1.0.1.0
Other Options
blank: none
/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to our web site.)
/C01: Silicone coating
/C02: Polyurethane coating

RELATED PRODUCTS

• Controller PLC8 Series
• Remote I/O PLC8 Series
• EDS file
(downloadable at our web site.)

GENERAL SPECIFICATIONS

Construction: Stand-alone
Connection:
• Discrete input, discrete output
Device side connector: In-house made
Applicable connector: DFMC1,5/2-ST-3,5 (Phoenix Contact)
(included in the package)
Applpicable wire size: 0.2 - 1.5 mm2, stripped length 10 mm
• Excitation supply, internal bus:
   Connected to internal bus connector
• Internal power: Via internal bus connector
Isolation: Discrete input or discrete output or exc. supply to internal bus or internal power to FE

INPUT SPECIFICATIONS

■ Discrete input
Number of input: 2 points
Isolation: Photocoupler isolation
Input resistance: Approx. 6 kΩ
Common: 1 common per 2 points
Input detection voltage: 24 V DC ± 10 % (supplied from exc. supply)
ON current/resistance: ≥ 2.5 mA/ ≤ 2 kΩ
OFF current/resistance: ≤ 1.5 mA/ ≥ 10 kΩ
Sampling rate: 8 msec.
 

OUTPUT SPECIFICATIONS

■ Discrete output
Number of output: 2 points
Discrete specification: Photo MOSFET relay output
Common: 1 point per common
Rated load voltage: 50 V AC
Maximum load current: 200 mA
Maximum ON resistance: 0.5 Ω
Sampling rate: 1 msec.

INSTALLATION

Power consumption: ≤ 0.45 W
• Internal power: 5 V DC @ 48 mA
• Excitation supply output: 24 V DC @ 8.5 mA
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 10 to 90 %RH (non-condensing)
Ambience: No corrosive gas or heavy dust; no strong electric/magnetic field; no direct effect of vibration or physical impact
Mounting: DIN rail
Weight: 130 g (0.29 lb)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute
(discrete input or discrete output or exc. supply to internal bus or internal power to FE)

EXTERNAL VIEW

EXTERNAL DIMENSIONS unit: mm [inch]

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM