ES-8380 Rev.18
R3-DA16A
Remote I/O R3 Series
DISCRETE INPUT MODULE
(Di 16 points; with external excitation supply)
MODEL: R3–DA16A[1][2]
ORDERING INFORMATION
• Code number: R3-DA16A[1][2]
Specify a code from below for each of [1] and [2].
(e.g. R3-DA16AW/110/CE/Q)
• Specify the specification for option code /Q
(e.g. /C01/S01)
NO. OF CHANNELS
16
: 16
EXCITATION SUPPLY
A
: External excitation
[1] COMMUNICATION MODE
S
: Single
W
: Dual
[2] OPTIONS (multiple selections)
External Excitation
blank
: 24 V DC
/12
: 12 V DC
/5
: 5 V DC
/48
: 48 V DC
/110
: 110 V DC
Standards & Approvals
blank
: Without CE
/CE
: CE marking
Other Options
blank
: none
/Q
: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to our web site.)
/C01
: Silicone coating
/C02
: Polyurethane coating
/C03
: Rubber coating
/C04
: Polyolefin coating
TERMINAL SCREW MATERIAL
/S01
: Stainless steel
GENERAL SPECIFICATIONS
Connection
Internal bus
: Via the Installation Base (model: R3-BSx)
Input
: M3 separable screw terminal (torque 0.5 N·m)
Internal power
: Via the Installation Base (model: R3-BSx)
Screw terminal
: Nickel-plated steel (standard) or stainless steel
Isolation
: Input to internal bus or internal power
Excitation monitor
: Selectable with side DIP switch; ON/OFF setting available
RUN indicator
: Bi-color (red/green) LED;
Red when the bus A operates normally;
Green when the bus B operates normally;
Amber when both buses operate normally.
ERR indicator
: Bi-color (red/green) LED;
Red with excitation abnormality;
Green in normal operating conditions.
Input status indicator
: Red LED; turns on with the input ON.
Read rate
: 1 / 5 / 10 / 20 / 50 / 70 / 100 / 200 msec. selectable with DIP SW
INPUT SPECIFICATIONS
Number of input
: 16 points
Isolation
: Optical isolator
Input resistance
:
Approx. 4.4 kΩ (24 V DC)
Approx. 2.2 kΩ (12 V DC)
Approx. 800 Ω (5 V DC)
Approx. 22 kΩ (48 V DC)
Approx. 54 kΩ (110 V DC)
Common
: Positive or negative common (NPN/PNP) per 16 points
Rated input voltage
24V exc.: 24 V DC +10/-15 % (ripple 5 %p-p max.)
12V exc.: 12 V DC ±10 % (ripple 5 %p-p max.)
5V exc.: 5 V DC ±10 % (ripple 5 %p-p max.)
48V exc.: 48 V DC ±10 % (ripple 5 %p-p max.)
110V exc.: 110 V DC (90 - 121 V DC, ripple 5 %p-p max.)
Rated input current
:
Approx. 5 mA (24 V DC, 12 V DC, 5 V DC)
Approx. 2 mA (48 V DC, 110 V DC)
ON voltage/current
:
≥ 11 V, ≥ 2.5 mA (24 V DC)
≥ 5.5 V, ≥ 2.5 mA (12 V DC)
≥ 3V, ≥ 2.5 mA (5 V DC)
≥ 35V, ≥ 1.5 mA (48 V DC)
≥ 85V, ≥ 1.5 mA (110 V DC)
OFF voltage/current
:
≤ 6 V, ≤ 1.3 mA (24 V DC)
≤ 3 V, ≤ 1.3 mA (12 V DC)
≤ 1 V, ≤ 1.3 mA (5 V DC)
≤ 20 V, ≤ 1.0 mA (48 V DC)
≤ 50 V, ≤ 1.0 mA (110 V DC)
INSTALLATION
Operating temperature
: -10 to +55°C (14 to 131°F)
Operating humidity
: 30 to 90 %RH (non-condensing)
Atmosphere
: No corrosive gas or heavy dust
Mounting
: Installation Base (model: R3-BSx)
Weight
: 200 g (0.44 lb)
PERFORMANCE
Data allocation
: 1
Current consumption
: 80 mA
Insulation resistance
: ≥ 100 MΩ with 500 V DC
Dielectric strength
: 2000 V AC @ 1 minute
(input to internal bus or internal power)
2000 V AC @ 1 minute (power input to FG; isolated on the power supply module)
STANDARDS & APPROVALS
EU conformity
:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
Low Voltage Directive
(External excitation 110 V DC only)
EN 61010-1, EN 61010-2-201
Installation Category I (contact input)
Pollution Degree 2
Input to internal bus or internal power: Reinforced
insulation (150 V)
RoHS Directive
FUNCTIONS
•
Excitation Monitor ON
The input is held at the last status when the loss of excitation is detected. The excitation must be connected across the terminal 9 (19) and 10 (20).
•
Excitation Monitor OFF
All input signals are turned off when the loss of excitation is detected.
EXTERNAL VIEW
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM